Shanghai ENJUE Machinery Equipment Co., Ltd is one of the most experienced manufacturers and suppliers of Non-standard Lifting Beam in China. If you're going to buy custom Non-standard Lifting Beam made in China, welcome to get more information from our factory. For price consultation, contact us.
Enjue Non-standard lifting beam designed for 20-foot containers and heavy bulk cargo. With a core breakthrough of 60-ton safe working load (SWL), combined with modular design and an intelligent electrical system, this product redefines the heavy lifting standards in ports, logistics, construction, and other fields.
Technical parameters of the non-standard lifting beam
Maximum safe working load (SWL): 60 tons. Tested by the German TÜV-certified laboratory, it can stably carry oversized cargo with a 30% safety margin.
Weight optimization: It adopts a high-strength lightweight design, weighs only 5.5 tons (including a full set of electrical systems), and the load-to-weight ratio reaches 10.9:1, which significantly increases the crane's payload.
Power and efficiency
Motor system: Equipped with a 0.75kW three-phase asynchronous motor, 380V/50Hz industrial-grade configuration, the energy consumption is lower than that of similar products.
Response speed: The electric push rod components achieve millisecond-level locking pin opening and closing, improving hoisting efficiency
Precise adaptability.
Structural design of the non-standard lifting beam
Steel structure frame
The main beam is made of Q690D high-strength steel with a yield strength of 690MPa, and the bending modulus is greatly improved compared with Q345 steel
The box beam structure has built-in reinforcement ribs and a service life of more than 20 years.
Safety redundancy system
Dual locking pin mechanism: independent hydraulic lock + mechanical lock double insurance, single point failure can still maintain 90% bearing capacity.
Overload protection: The motor has a built-in torque limiter, which automatically cuts off the power and triggers an audible and visual alarm when overloaded.
Container Specialist - Precision Engineered for Automated Terminals
Fully compatible with 20-ft standard containers, open-top units, reefer containers, and other special-purpose variants. Delivers a lifting accuracy of ±5mm, perfectly aligned with the stringent demands of fully automated terminal operations.
Cold-Resilient Locking System: Engineered with a low-temperature preset function, ensuring smooth lock-pin actuation even in environments as harsh as -10℃.
Bulk Cargo & Non-Standard Handling
Equipped with an optional quick-detach lifting attachment, enabling seamless switching between non-standard loads such as steel coils and prefabricated components.
Emergency Response & Rapid Deployment
Featuring a lightweight, non-standard lifting beam design for swift mobilization in critical situations. Proven in real-world missions - including chemical plant equipment rescue operations and the successful lifting of 120-ton specialty tanks within just 48 hours.
Beyond a Lifting Tool - A Smart Lifting Solution for Industry 4.0
The Enjue spreader lifting beam is more than equipment - it's an intelligent lifting ecosystem. From -50℃ arctic oil fields to 45℃ tropical ports, from standardized containers to irregular and oversized cargo.
Hot Tags: Non-standard Lifting Beam, China Non-standard Lifting Beam manufacturers, suppliers, factory, container stacking spreader, container spreader for marine handled containers, container spreader for commodities, container spreader for breakbulk cargo, aluminum container spreader, container spreader for concrete cargo handled containers
