Shanghai ENJUE Machinery Equipment Co., Ltd is one of the most experienced manufacturers and suppliers of 40‘container loader in China. If you're going to buy custom 40‘container loader made in China, welcome to get more information from our factory. For price consultation, contact us.
This 40'container loader is specifically designed for use with loaders and is suitable for efficient unloading operations of ISO-standard 40-foot containers. By tilting at a large angle (upright at 90° vertical), it allows the cargo inside the container to be loaded quickly and thoroughly, significantly improving bulk cargo handling efficiency. The entire machine features a low-center-of-gravity structure and a high-strength hydraulic system to ensure a smooth, vibration-free tilting process, making it especially suitable for rapid unloading of bulk materials such as grains, ores, and chemical raw materials.
Core Advantages
Low Center of Gravity, Stable Tilting
The overall 40'container loader structure is optimized for a low center of gravity, ensuring stable, smooth tilting movements. During the container lifting process, there is no risk of lateral shaking or tilting, ensuring operational safety.
90-Degree Vertical Loading. Thorough and Efficient
Supports loading of the 40'container loader at a maximum vertical angle of 90 degrees, allowing materials in the container to quickly slide out, achieving a high unloading rate and reducing unloading time by 3–5 times compared to traditional dumping methods.
Cylinders Positioned Away from the Discharge Port to Extend Lifespan
The hydraulic cylinder layout is designed scientifically, maintaining a safe distance from the discharge port, effectively reducing direct wear and erosion of cylinder seals and piston rods by dust and particles, and lowering the failure rate.
Fast, Low-Cost, Easy to Operate
Tilting is rapid with short single unloading cycles; equipment operates with low energy consumption and maintenance costs; supports manual crank control or remote control, allowing operators to stay away from hazardous areas.
Reduces Worker Labor Intensity
Fully mechanized tilting replaces manual clearing, greatly reducing heavy labor tasks and improving the working environment.
| Item | Configuration |
|---|---|
| Applicable container | ISO 40 foot container |
| Rated tilting load | Customized |
| Tilting angle range | 0° ~ 90° |
| Main motor power | 37 kW |
| Hydraulic system pressure | 22 MPa |
| Control voltage | DC24V / AC220V |
| Protection level | IP55 |
| Control method | Manual control or remote control |
| Power supply | AC380V / 3-Phase / 50Hz |
| Loading capacity | Configured as agreed |
| Hydraulic cylinder | Customized reinforced type |
| Allowable wind speed for operation | According to design requirements |
| Dead weight | ~14.8t |
| Cylinder extension and retraction time | Adjustable according to load |
Application Scenarios
Fast unloading of bulk cargo containers at ports and railway freight yards
Unloading of soybeans/corn/wheat from trucks at grain reserves and feed mills
Container loading of ores and powders at mining and metallurgical enterprises
Transfer of granular/powder materials in the chemical and building materials industries
Safety and Maintenance Tips
Before operating the equipment, check the hydraulic oil level and the sealing of the pipelines.
It is strictly forbidden for personnel to enter the area beneath the container during tilting.
Regularly clean the surface of the oil cylinder and the discharge port to remove dust, ensuring good heat dissipation.
It is recommended to replace the hydraulic oil filter every 500 working hours.
Hot Tags: 40‘container loader, China 40‘container loader manufacturers, suppliers, factory, 20ft Hydraulic Container Tilter For Loading, Container Tilter With Truck, container unloading equipment, Container Tilter for Loading, 40ft Hydraulic Container Tilter For Unloading, 20ft Hydraulic Container Tilter For Unloading
