Enjue remote control grab technology is quite mature and safe. Here are some safety tips for remote control grabs:
Safety Operation Recommendations of the Remote Control Grab
Pre-Operation Inspection
Equipment Inspection:
Confirm that the remote control grab battery is fully charged and the signal is normal.
Inspect the integrity of the remote control grab wire rope, pulley assembly, hydraulic system, and electrical wiring.
Environmental Inspection: Ensure the working environment is free of obstacles, the track is flat, and there is no accumulated water or debris.
Operating Standards
Load Management:
Overloading is strictly prohibited. Observe the rated load and material density limits of the grab.
Avoid grabbing highly viscous or easily spilled materials to prevent overloading and material jamming.
Operating Tips of the remote control grab:
When closing the grab bucket, ensure the hoist rope and opening and closing rope are synchronized.
Avoid the grab bucket from striking materials, lifting equipment, or the ship's side to prevent deformation of the cylinder piston rod.
Maintenance and Care
Regular Maintenance of the Remote Control Grab:
Check the hydraulic system oil level and seals monthly, and replace the hydraulic oil annually.
Perform insulation tests on the electrical system and replace any aging circuits promptly.
Extended Outages:
Remove the battery and store it fully charged to prevent damage from self-discharge.
Clean the equipment, apply anti-rust paint, and store it in a dry, well-ventilated area.
