Home > Knowledge > Content

How to determine the volume of the grab bucket?

Nov 26, 2025

 

The grab bucket's volume is determined by the desired bulk cargo volume (MFMF) and two physical and mechanical parameters of the bulk cargo: capacity (γmγm) and natural slope angle (αBαB​).

Therefore, when a grab bucket designed for one type of bulk cargo is used to grab another, the nominal volume of the grab bucket and the actual volume of the bulk cargo grabbed often differ. The capacity (γmγm) of the bulk cargo is relatively easy to measure, but the natural slope angle (αBαB) usually varies considerably due to differences in particle size and moisture content.

 

The volume VF of a long-strut double-jaw (clamshell)grab bucket consists of two parts: V1V1 and V2V2 (Figure as follows).

V1V1 is called the horizontal volume of the grab bucket, and V2V2 is called the stacking volume of the grab bucket. When the lateral area of the jaw plates is calculated, multiplying it by the inner width gives the horizontal volume V1 = F1⋅EV1 = F1⋅E.

Multiplying the area F2F2 by EE gives V2V2. Considering that bulk cargo overflows from the jaw plates after the grab bucket is closed, the actual volume of the grab bucket is:

VF = V1 + V2 − V3

info-1179-582

Send Inquiry