The common fault of the grab bucket during use is abrasive wear. According to the relevant data analysis, it can be found that among the failure forms of the grab bucket, about 40% of the grab bucket loses its working performance due to tip wear, and about 30% of the grab bucket loses its working performance due to blade wear.
The use of the grab bucket is very frequent, and the operating level of its operator is limited. The failure rate of the grab bucket is very high. Therefore, it is necessary to strengthen the inspection of these parts during daily inspections, and also do a good job of maintenance of these parts.
In order to better manage the grab bucket, so as to ensure its production and ensure its safety, it is effective according to the personnel composition involved in the use of the grab bucket, the maintenance of the equipment and the repair, its working scope and working procedures.
When the grab bucket is in use, the duty supervisor needs to arrange the grab bucket to be refueled in time every day, and refuel the upper beam part of the safety grab bucket every Monday and Thursday. If there are special circumstances, more allowances are allowed, and then the situation is effectively recorded in the duty log.
The grab bucket needs to meet its standards when refueling, so that it can ensure sufficient lubrication to a certain extent. If the refueling fails, it needs to be recorded in time and effectively reported to the inspection personnel or the technical staff in charge. It is required to record each refueling situation in the operation log.
The grab bucket driver needs to actively accept the opinions of the grab bucket refueling inspector when refueling. The grab bucket crane reminds the driver to effectively avoid accidents such as the grab bucket rubbing against the cabin during the operation, and prevent similar incidents caused by incorrect operation methods.
