In the process of use, the remote control grab bucket is generally composed of upper and lower bearing beam assemblies and bucket bodies, among which the sliding seat assembly and the bearing beam assembly are directly and effectively connected to the crane, and the piston rod and the cylinder in the remote control grab bucket are effectively connected to the sliding seat assembly and the lower bearing beam assembly respectively.
The sliding seat in the remote control grab bucket can effectively slide up and down under the action of the crane, and will directly drive the lower bearing beam to rise together during the sliding process.
In this way, the closing of the grab bucket in the equipment will directly disengage the sliding seat and the bearing beam under the control of its remote control, so that the opening of the grab bucket can be very effectively controlled.
In the process of use, the remote control grab bucket is a novel grab bucket that is controlled to open by a wireless remote control transmitter in cooperation with a single-cable crane. When in use, the equipment does not require external energy.
The equipment can automatically close with the lifting of the hook on the material pile, and can also automatically open at any position in the air, and then stop at any time.
The remote control grab has a battery inside. During use, the opening and closing of the grab can be effectively controlled by controlling the opening and closing of the solenoid valve. The grab does not require any power supply during use, so it plays a role in green environmental protection.
The remote control grab does not require additional accessories during use. The oil temperature in the equipment should be low during use. The good sealing of the oil pipe can well ensure the service life of the equipment so that the equipment can directly ensure that it can work continuously for 24 hours.
The control system of the remote control grab can be directly divided into two modules, namely the control and hydraulic modules. The structure of the entire equipment is relatively simple and it is very convenient to carry out effective maintenance. When the equipment is just opened, its speed will be relatively slow, which will greatly reduce the impact of unloading on the grab.
